Efergy E2 Especificações descarregar pdf (Página 10)

If I remove the batteries will I lose the information on the display?

If you need to change or remove the batteries, the display has an internal

memory, soinformation stored on the display will not be lost.

How do I reset the display (clear the data and start again)?

Press MODE and DATE buttons simultaneously and hold for two seconds.

How far does the device transmit?

Transmitter’s works around 40meters within the home. The 433MHz range is well

suited forin home use. This can cover three floors, and also well suited to builders

where metersare outside the main building.

I have three dashes (- - -) showing on the display. What does this mean?

Move the display closer to the transmitter and press the link button. If the dashes

remainon the display this would indicate the transmitter and receiver are not

communicating.Please contact efergy Customer Service to help locate the problem.

Backlight appears to work sometimes, and not other times. Is my display

broken?

No. The backlight is on a timer to save battery life. The display should work

at darkerperiods of the day, when any buttons are pressed.

For more information about the e2 and the elink software, go to www.efergy.com

Model Name/Number: efergy e2 1.0

Frequency: 433.52MHz

Transmision Time: 6s. 12s. o 18s.

Transmision Range: 40-70m

Voltage Range (in the sensor): 110V-400V

Measuring Current: 50mA-95A

Accuracy: >90%

The LED backlight will be activated from 18:00Hrs to 6:00Hrs.

Carbon ratio: 0,50 kg. CO2 / kWh

You will find some symbols on the monitor:

Low battery warnings (monitor/transmiter)

Alarm on/off

Transmission sign (Link is OK).

SPECIFICATIONS

FREQUENTLY ASKED QUESTIONS

1 2 3 4 5 6 7 8 9 10

Sem comentários

Efergy E2 Especificações Página 10